Al | Aluminium
Analysis
0.00 µg/l
Setpoint
0 - 60 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Al Aluminium | Aluminium | 0.00 µg/l | 0 - 60 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 18.00 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
18.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 10055.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 411.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1109.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 172.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 47.00 mg/l | 64 mg/l | |
B Boron | Boron | 1.00 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 5.00 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 476.00 mg/l | 900 mg/l |
10055.00 mg/l
10000 - 11300 mg/l
411.00 mg/l
415 - 520 mg/l
1109.00 mg/l
1320 - 1500 mg/l
172.00 mg/l
380 - 480 mg/l
47.00 mg/l
64 mg/l
1.00 mg/l
4.5 mg/l
5.00 mg/l
8 - 12 mg/l
476.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 140.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 5.00 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 146.00 µg/l | 12 µg/l |
140.00 µg/l
200 µg/l
5.00 µg/l
5 µg/l
146.00 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 34.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 127.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 44.00 µg/l | 30 - 90 µg/l |
0.00 µg/l
0 - 3 µg/l
34.00 µg/l
0 - 5 µg/l
127.00 µg/l
0 - 3 µg/l
44.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 67.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
67.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 744.00 µg/l | 0 - 200 µg/l |
744.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 22.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.067 mg/l | 0.018 - 0.07 mg/l |
22.00 µg/l
6 - 23 µg/l
0.067 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with NYOS salt or Red Sea Salt (blue bucket), spread over 6 weeks
The analysis has found that the Strontium level in the aquarium is low.
For your chosen Habitat we would recommend to also follow the daily dosage advice of Strontium as this should benefit the animals in your aquarium.
3 weeks prior to fragging we would recommend that you double the daily dosage.
The analysis has found that the Magnesium levels are low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
The analysis has found that the Calcium levels are slightly low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Your Silicon levels are too high.
Check for possible contamination source. To help you in finding the source of error, we have listed the most frequent sources of contamination for silicon (sorted in descending order of frequency):
1. RO/DI Supply
2. Iron based phosphate remover (not RowaPhos or PhosBan)
3. SIPORAX Type media
4. Ceramics
Renew PO4 remover media, use AL99 or RowaPhos / PhosBan
Your Barium levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Monitor with future ICP-OES tests.
Use TRITON AL99 PO4 remover to remove Barium
Your Manganese levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Your Molybdenum levels are too high. This can lead to severe bacterial growth (Cyano, etc.).
Check for possible contamination source. To assist you in finding the source of error, we have listed them the most common sources of molybdenum (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Food
3. Contaminated salts
Your Lithium levels are slightly low.
Please dose as recommended in the DOSE tab.
Your Sulphur levels are too low.
WARNING! Dosage only to be carried out by advanced reef keepers.
Due to the possible hazardous nature of dosing Sulphur the dosage amounts include a safety factor to ensure that the risk of overdose is reduced. This may result in further dosing being required with subsequent ICP testing.
Please follow the directions on the Dose tab.
Your Strontium levels are slightly low.
Please dose as recommended in the DOSE tab.
Your Bromine levels are slightly low.
WARNING! Dosage only to be carried out by advanced reef keepers.
Due to the possible hazardous nature of dosing Bromine the dosage amounts include a safety factor to ensure that the risk of overdose is reduced. This may result in further dosing being required with subsequent ICP testing.
Please follow the directions on the Dose tab.
Your Boron levels are too low.
Please dose as recommended in the DOSE tab.
Your Potassium levels are too low.
Please dose as recommended in the DOSE tab.
Your Magnesium levels are too low.
Please check your magnesium test kit for accuracy.
Please dose as recommended in the DOSE tab.
Your Calcium levels are slightly low.
Check for accuracy of home Ca test kit if used.
Please dose as recommended in the DOSE tab.
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 20.43g. On the last day please use 6.94g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 14 days. For the first 13 days the daily dosage should be 90.9g. On the last day please use 4.66g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 15 days. For the first 14 days the daily dosage should be 13.5g. On the last day please use 8.31g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 9 days. For the first 8 days the daily dosage should be 45ml. On the last day please use 33.75ml.
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 9ml. On the last day please use 7.27ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.54ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 1.44ml for 1 day.
We recommend a daily maintenance dose of 0.14ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.54ml for 1 day.
We recommend a daily maintenance dose of 0.04ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Select your country and buy the products here