Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 7.18 µg/l | 0 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Al Aluminium | Aluminium | 44.00 µg/l | 0 - 60 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 0.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
7.18 µg/l
Setpoint
0 µg/l
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Al | Aluminium
Analysis
44.00 µg/l
Setpoint
0 - 60 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
0.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10853.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 428.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1387.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 396.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 66.00 mg/l | 64 mg/l | |
| B Boron | Boron | 3.94 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 3.22 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 898.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10853.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
428.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1387.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
396.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
66.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
3.94 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
3.22 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
898.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 623.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 0.77 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 17.00 µg/l | 12 µg/l |
Li | Lithium
Analysis
623.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
0.77 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
17.00 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 7.13 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 1.06 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 130.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
7.13 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
1.06 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
130.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 16.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
16.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 26.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
26.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 141.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
141.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 17.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.052 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
17.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.052 mg/l
Setpoint
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Sr
The analysis has found that the Strontium level in the aquarium is low.
For your chosen Habitat we would recommend to also follow the daily dosage advice of Strontium as this should benefit the animals in your aquarium.
3 weeks prior to fragging we would recommend that you double the daily dosage.
I
Your Iodine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Monitor with future ICP-OES tests.
Al
Low levels of Aluminium have been found in your system.
Although not as dangerous at very low levels it is important that you check your system for any possible contaminations. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):
1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water
Use ROWAphos or Phosban phosphate remover media to remove the aluminium.
Fe
Your Iron levels are too high.
Check for possible contamination source. To help you in finding the source of error, we have listed them the most common sources of iron (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Iron based Phosphate remover (too much flow in reactor)
4. Low pH in the aquarium
Zn
Your Zinc levels are slightly elevated.
Check for possible contamination source. Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Mo
Your Molybdenum levels are slightly elevated. This can lead to severe bacterial growth (Cyano, etc.).
Check for possible contamination source. To assist you in finding the source of error, we have listed them the most common sources of molybdenum (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Food
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Li
Your Lithium levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common lithium sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts / contaminated magnesium salts
3. Artificial Rock/ Reef ceramics
4. Food
Sr
Your Strontium levels are slightly low.
Please dose as recommended in the DOSE tab.
Sn
High levels of Tin have been found in your system.
As Tin can be very dangerous to you aquarium you should first try to find the contamination source. To help you in finding the source of error, we have listed the most common sources of tin (sorted in descending order of frequency):
1. Contaminated trace elements
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
Very important for your aquarium
Ca
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage of 15.15g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
K
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage of 2.65g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
Sr
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 6.9ml. On the last day please use 6.04ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.66ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
B
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 34.5ml. On the last day please use 13.74ml.
P
The analysis has found a low phosphorus / phosphate level in the aquarium.
In case of problems we recommend to remove/reduce the phosphate absorber from the system and to increase feeding.
For problems with Cyanobacteria, the product that best suits your system is:
TRITON Organic Supplements P Beta
For a fish tank without algae/Cyanobacteria problems the product that is best suited is:
TRITON Organic Supplements P Alpha
Please contact us for further support on hello@triton.de
We recommend the corrective dosage of 0.14ml for 1 day.
Fine-tuning Level 1 ( Basic )
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 3.24ml for 1 day.
We recommend a daily maintenance dose of 0.27ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
V
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.41ml for 1 day.
We recommend a daily maintenance dose of 0.03ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 6.9ml. On the last day please use 0.78ml.
Select your country and buy the products here
-
1x Triton Reagents Calcium 1000g
0
-
1x Triton Reagents Potassium 1000g
0
-
1x Triton Reagents Boron 1000ml
0
-
1x Triton Reagents Strontium 100ml - 10x concentrate
0
-
1x Triton Reagents Nickel 100ml
0
-
1x Triton Reagents Vanadium 100ml
0
-
1x Triton Reagents Manganese 100ml
0
-
1x TRITON Organics Phosphorus Supplement 100ml
0