Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Al Aluminium | Aluminium | 12.00 µg/l | 0 - 60 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 4.24 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Al | Aluminium
Analysis
12.00 µg/l
Setpoint
0 - 60 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
4.24 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10740.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 481.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1398.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 411.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 78.00 mg/l | 64 mg/l | |
| B Boron | Boron | 4.94 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 4.79 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 973.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10740.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
481.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1398.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
411.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
78.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
4.94 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
4.79 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
973.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 227.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 3.46 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 9.02 µg/l | 12 µg/l |
Li | Lithium
Analysis
227.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
3.46 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
9.02 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 23.00 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 65.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
23.00 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
65.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 140.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
140.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 144.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
144.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 33.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.101 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
33.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.101 mg/l
Setpoint
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Sr
The analysis has found that the Strontium level in the aquarium is low.
For your chosen Habitat we would recommend to also follow the daily dosage advice of Strontium as this should benefit the animals in your aquarium.
3 weeks prior to fragging we would recommend that you double the daily dosage.
Cu
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
P
Your Phosphorus / phosphate levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods (flakes or pellets)
Ba
Your Barium levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Use AL99 PO4 remover to remove Barium
Zn
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Sr
Your Strontium levels are slightly low.
Please dose as recommended in the DOSE tab.
Br
Your Bromine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most frequent bromine sources (sorted in descending order of frequency):
1. Contaminated salts such as calcium chloride
2. Contaminated trace elements
3. Contaminated salt mixtures
If you have problems in the aquarium you can change 2x 10-15% of the aquarium water, spread over 2-4 weeks.
Monitor with future ICP-OES tests.
Cu
Low levels of Copper have been found in your system.
Although not as dangerous at very low levels it is important that you check your system for any possible contaminations.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Important for your aquarium
Sr
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 12.88ml. On the last day please use 12.01ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.83ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Basic )
Mo
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 19.18ml for 1 day.
V
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.77ml for 1 day.
We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 6.44ml. On the last day please use 6.43ml.
We recommend a daily maintenance dose of 1.07ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage of 9.91ml for 1 day.
Select your country and buy the products here
-
1x Triton Reagents Strontium 100ml - 10x concentrate
0
-
1x Triton Reagents Nickel 100ml
0
-
1x Triton Reagents Molybdenum 100ml
0
-
1x Triton Reagents Vanadium 100ml
0
-
1x Triton Reagents Manganese 100ml
0