Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 3.05 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 169.00 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 8.31 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
3.05 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
169.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
8.31 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 11606.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 562.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1488.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 440.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 76.00 mg/l | 64 mg/l | |
B Boron | Boron | 5.10 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 8.27 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 985.00 mg/l | 900 mg/l |
11606.00 mg/l
10000 - 11300 mg/l
562.00 mg/l
415 - 520 mg/l
1488.00 mg/l
1320 - 1500 mg/l
440.00 mg/l
380 - 480 mg/l
76.00 mg/l
64 mg/l
5.10 mg/l
4.5 mg/l
8.27 mg/l
8 - 12 mg/l
985.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 230.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 0.00 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 0.00 µg/l | 12 µg/l |
230.00 µg/l
200 µg/l
0.00 µg/l
5 µg/l
0.00 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 14.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 0.00 µg/l | 30 - 90 µg/l |
0.00 µg/l
0 - 3 µg/l
14.00 µg/l
0 - 5 µg/l
0.00 µg/l
0 - 3 µg/l
0.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 0.67 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.67 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 29.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
29.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 51.00 µg/l | 0 - 200 µg/l |
51.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 16.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.049 mg/l | 0.018 - 0.07 mg/l |
16.00 µg/l
6 - 23 µg/l
0.049 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Your Zinc levels are slightly elevated.
Check for possible contamination source. Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Your Bromine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most frequent bromine sources (sorted in descending order of frequency):
1. Contaminated salts such as calcium chloride
2. Contaminated trace elements
3. Contaminated salt mixtures
If you have problems in the aquarium you can change 2x 10-15% of the aquarium water, spread over 2-4 weeks.
Monitor with future ICP-OES tests.
Your Calcium levels are slightly elevated.
Check for accuracy of home Ca test kit, if used.
If you are dosing additional Calcium on top of regular doses, then reduce.
If you are running the Triton Method, then you can reduce the dosage from Base Elements solution No2 and monitor with a reliable home test kit. Once the measurement has dropped back down to 440 mg/l then return the dose back to equal amounts as the other solutions.
Check salinity measuring equipment for accuracy and lower salinity and monitor.
Check salinity measuring equipment for accuracy and monitor.
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
High levels of Aluminium have been found in your system.
As high levels of Aluminium can be dangerous to your aquarium you should try to find the contamination. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):
1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water
Use ROWAphos or Phosban phosphate remover media to remove the aluminium.
High levels of Tin have been found in your system.
As Tin can be very dangerous to you aquarium you should first try to find the contamination source. To help you in finding the source of error, we have listed the most common sources of tin (sorted in descending order of frequency):
1. Contaminated trace elements
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 5ml. On the last day please use 1.00ml.
We recommend a daily maintenance dose of 0.60ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
The analysis has found a low phosphorus / phosphate level in the aquarium.
In case of problems we recommend to remove/reduce the phosphate absorber from the system and to increase feeding.
For problems with Cyanobacteria, the product that best suits your system is:
TRITON Organic Supplements P Beta
For a fish tank without algae/Cyanobacteria problems the product that is best suited is:
TRITON Organic Supplements P Alpha
Please contact us for further support on hello@triton.de
We recommend the corrective dosage of 0.30ml for 1 day.
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 25ml. On the last day please use 10.00ml.
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.60ml for 1 day.
We recommend a daily maintenance dose of 0.04ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 5ml.
We recommend a daily maintenance dose of 0.83ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 10ml. On the last day please use 5.00ml.
Select your country and buy the products here