Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 2.41 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 2.92 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
2.41 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
2.92 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 10312.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 448.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1344.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 435.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 66.00 mg/l | 64 mg/l | |
B Boron | Boron | 4.10 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 7.65 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 963.00 mg/l | 900 mg/l |
10312.00 mg/l
10000 - 11300 mg/l
448.00 mg/l
415 - 520 mg/l
1344.00 mg/l
1320 - 1500 mg/l
435.00 mg/l
380 - 480 mg/l
66.00 mg/l
64 mg/l
4.10 mg/l
4.5 mg/l
7.65 mg/l
8 - 12 mg/l
963.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 212.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 0.00 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 3.05 µg/l | 12 µg/l |
212.00 µg/l
200 µg/l
0.00 µg/l
5 µg/l
3.05 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 1.92 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 17.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 37.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 93.00 µg/l | 30 - 90 µg/l |
1.92 µg/l
0 - 3 µg/l
17.00 µg/l
0 - 5 µg/l
37.00 µg/l
0 - 3 µg/l
93.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 14.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
14.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 39.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
39.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 230.00 µg/l | 0 - 200 µg/l |
230.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 28.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.086 mg/l | 0.018 - 0.07 mg/l |
28.00 µg/l
6 - 23 µg/l
0.086 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Your Iodine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Monitor with future ICP-OES tests.
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Your Phosphorus / Phosphate levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods
Your Iron levels are too high.
Check for possible contamination source. To help you in finding the source of error, we have listed them the most common sources of iron (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Iron based Phosphate remover (too much flow in reactor)
4. Low pH in the aquarium
Your Manganese levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Low levels of Copper have been found in your system.
Although not as dangerous at very low levels it is important that you check your system for any possible contaminations.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 64.64g. On the last day please use 19.40g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 32.00ml for 1 day.
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 1.35ml for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 16ml. On the last day please use 12.64ml.
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 6.4ml. On the last day please use 3.20ml.
Select your country and buy the products here