Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 9.42 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 11.00 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 0.00 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
9.42 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
11.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 11148.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 308.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1474.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 418.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 87.00 mg/l | 64 mg/l | |
B Boron | Boron | 4.78 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 5.38 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 856.00 mg/l | 900 mg/l |
11148.00 mg/l
10000 - 11300 mg/l
308.00 mg/l
415 - 520 mg/l
1474.00 mg/l
1320 - 1500 mg/l
418.00 mg/l
380 - 480 mg/l
87.00 mg/l
64 mg/l
4.78 mg/l
4.5 mg/l
5.38 mg/l
8 - 12 mg/l
856.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 987.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 3.27 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 10.00 µg/l | 12 µg/l |
987.00 µg/l
200 µg/l
3.27 µg/l
5 µg/l
10.00 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 4.58 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 8.40 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 12.00 µg/l | 30 - 90 µg/l |
4.58 µg/l
0 - 3 µg/l
8.40 µg/l
0 - 5 µg/l
0.00 µg/l
0 - 3 µg/l
12.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 1.05 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
1.05 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 99.00 µg/l | 0 - 200 µg/l |
99.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 5.83 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.018 mg/l | 0.018 - 0.07 mg/l |
5.83 µg/l
6 - 23 µg/l
0.018 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
The analysis has found that the Strontium level in the aquarium is low.
For your chosen Habitat we would recommend to also follow the daily dosage advice of Strontium as this should benefit the animals in your aquarium.
3 weeks prior to fragging we would recommend that you double the daily dosage.
The analysis has found that the Calcium levels are low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
Your Zinc levels are slightly elevated.
Check for possible contamination source. Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Your Vanadium levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of vanadium (sorted in descending order of frequency):
1. Trace element overdose
2. Reef ceramics
3. Contaminated salts
Your Lithium levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common lithium sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts / contaminated magnesium salts
3. Artificial Rock/ Reef ceramics
4. Food
Your Strontium levels are slightly low.
Please dose as recommended in the DOSE tab.
Your Bromine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most frequent bromine sources (sorted in descending order of frequency):
1. Contaminated salts such as calcium chloride
2. Contaminated trace elements
3. Contaminated salt mixtures
If you have problems in the aquarium you can change 2x 10-15% of the aquarium water, spread over 2-4 weeks.
Monitor with future ICP-OES tests.
Your Calcium levels are too low.
Check for accuracy of home Ca test kit if used.
Please dose as recommended in the DOSE tab.
High levels of Tin have been found in your system.
As Tin can be very dangerous to you aquarium you should first try to find the contamination source. To help you in finding the source of error, we have listed the most common sources of tin (sorted in descending order of frequency):
1. Contaminated trace elements
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 11 days. For the first 10 days the daily dosage should be 13.7562g. On the last day please use 8.91g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 6.06ml. On the last day please use 3.50ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.32ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 2.91ml for 1 day.
We recommend a daily maintenance dose of 0.29ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
The analysis has found a low phosphorus / phosphate level in the aquarium.
In case of problems we recommend to remove/reduce the phosphate absorber from the system and to increase feeding.
For problems with Cyanobacteria, the product that best suits your system is:
TRITON Organic Supplements P Beta
For a fish tank without algae/Cyanobacteria problems the product that is best suited is:
TRITON Organic Supplements P Alpha
Please contact us for further support on hello@triton.de
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 0.303ml. On the last day please use 0.19ml.
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 6.06ml for 1 day.
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 3.03ml.
We recommend a daily maintenance dose of 0.51ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage of 5.24ml for 1 day.
Select your country and buy the products here