Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 28.00 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 164.00 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 15.00 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
28.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
164.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
15.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 10268.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 549.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1563.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 359.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 92.00 mg/l | 64 mg/l | |
B Boron | Boron | 5.43 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 8.92 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 709.00 mg/l | 900 mg/l |
10268.00 mg/l
10000 - 11300 mg/l
549.00 mg/l
415 - 520 mg/l
1563.00 mg/l
1320 - 1500 mg/l
359.00 mg/l
380 - 480 mg/l
92.00 mg/l
64 mg/l
5.43 mg/l
4.5 mg/l
8.92 mg/l
8 - 12 mg/l
709.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 634.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 6.91 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 32.00 µg/l | 12 µg/l |
634.00 µg/l
200 µg/l
6.91 µg/l
5 µg/l
32.00 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 55.00 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 22.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 49.00 µg/l | 30 - 90 µg/l |
55.00 µg/l
0 - 3 µg/l
22.00 µg/l
0 - 5 µg/l
0.00 µg/l
0 - 3 µg/l
49.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 112.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
112.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 231.00 µg/l | 0 - 200 µg/l |
231.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 33.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.101 mg/l | 0.018 - 0.07 mg/l |
33.00 µg/l
6 - 23 µg/l
0.101 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
We have detected elevated Barium levels as well as eleveted Aluminium levels.
To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):
1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water
We have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Your Phosphorus / phosphate levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods (flakes or pellets)
Your Vanadium levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of vanadium (sorted in descending order of frequency):
1. Trace element overdose
2. Reef ceramics
3. Contaminated salts
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Your Molybdenum levels are too high. This can lead to severe bacterial growth (Cyano, etc.).
Check for possible contamination source. To assist you in finding the source of error, we have listed them the most common sources of molybdenum (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Food
3. Contaminated salts
Your Nickel levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common nickel sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Your Sulphur levels are slightly low.
Monitor with future ICP-OES tests.
Your Lithium levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common lithium sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts / contaminated magnesium salts
3. Artificial Rock/ Reef ceramics
4. Food
Your Potassium levels are slightly low.
Please dose as recommended in the DOSE tab.
Your Bromine levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most frequent bromine sources (sorted in descending order of frequency):
1. Contaminated salts such as calcium chloride
2. Contaminated trace elements
3. Contaminated salt mixtures
Your Magnesium levels are slightly elevated.
Please check your magnesium test kit for accuracy.
Your Calcium levels are slightly elevated.
Check for accuracy of home Ca test kit, if used.
If you are dosing additional Calcium on top of regular doses, then reduce.
If you are running the Triton Method, then you can reduce the dosage from Base Elements solution No2 and monitor with a reliable home test kit. Once the measurement has dropped back down to 440 mg/l then return the dose back to equal amounts as the other solutions.
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
High levels of Tin have been found in your system.
As Tin can be very dangerous to you aquarium you should first try to find the contamination source. To help you in finding the source of error, we have listed the most common sources of tin (sorted in descending order of frequency):
1. Contaminated trace elements
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 17.04g. On the last day please use 10.70g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 1.25ml for 1 day.
We recommend a daily maintenance dose of 0.13ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 5.68ml.
We recommend a daily maintenance dose of 0.95ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Select your country and buy the products here