Al | Aluminium
Analysis
38.00 µg/l
Setpoint
0 - 60 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Al Aluminium | Aluminium | 38.00 µg/l | 0 - 60 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Bi Bismuth | Bismuth | 0.00 µg/l | 0 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Cs Caesium | Caesium | 0.00 µg/l | 0 µg/l | |
| Ga Gallium | Gallium | 0.00 µg/l | 0 µg/l | |
| In Indium | Indium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 0.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| Ag Silver | Silver | 0.00 µg/l | 0.1 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Te Tellurium | Tellurium | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l |
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Bi | Bismuth
Analysis
0.00 µg/l
Setpoint
0 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cs | Caesium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ga | Gallium
Analysis
0.00 µg/l
Setpoint
0 µg/l
In | Indium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
0.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ag | Silver
Analysis
0.00 µg/l
Setpoint
0.1 µg/l
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Te | Tellurium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10788.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 426.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1320.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 409.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 61.00 mg/l | 64 mg/l | |
| B Boron | Boron | 4.00 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 9.00 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 877.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10788.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
426.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1320.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
409.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
61.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
4.00 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
9.00 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
877.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 192.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 1.00 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 5.00 µg/l | 12 µg/l |
Li | Lithium
Analysis
192.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
1.00 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
5.00 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 9.00 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 97.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
9.00 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
97.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 81.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
81.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 134.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
134.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 68.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.208 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
68.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.208 mg/l
Setpoint
0.018 - 0.07 mg/l
I
Your Iodine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Monitor with future ICP-OES tests.
P
Your Phosphorus / phosphate levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods (flakes or pellets)
Ba
Your Barium levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Monitor with future ICP-OES tests.
Use TRITON AL99 PO4 remover to remove Barium
Zn
Your Zinc levels are slightly elevated.
Check for possible contamination source. Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Very important for your aquarium
Ca
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 28.375g. On the last day please use 3.68g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Mg
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 126.25g. On the last day please use 63.16g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
B
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 62.5ml. On the last day please use 15.63ml.
Fine-tuning Level 1 ( Basic )
Mo
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 31.25ml. On the last day please use 12.50ml.
V
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.75ml for 1 day.
We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 6.25ml.
We recommend a daily maintenance dose of 1.04ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 12.5ml.
Select your country and buy the products here
-
1x Triton Reagents Calcium 1000g
0
-
1x Triton Reagents Magnesium 1000g
0
-
1x Triton Reagents Bromine 100ml - 10x concentrate
0
-
1x Triton Reagents Boron 1000ml
0
-
1x Triton Reagents Sulphate 1000g
0
-
1x Triton Reagents Lithium 100ml
0
-
1x Triton Reagents Nickel 100ml
0
-
1x Triton Reagents Molybdenum 100ml
0
-
1x Triton Reagents Vanadium 100ml
0
-
1x Triton Reagents Manganese 100ml
0