Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 24.00 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 15.00 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
24.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
15.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 11857.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 409.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1453.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 439.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 80.00 mg/l | 64 mg/l | |
B Boron | Boron | 4.19 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 10.80 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 995.00 mg/l | 900 mg/l |
11857.00 mg/l
10000 - 11300 mg/l
409.00 mg/l
415 - 520 mg/l
1453.00 mg/l
1320 - 1500 mg/l
439.00 mg/l
380 - 480 mg/l
80.00 mg/l
64 mg/l
4.19 mg/l
4.5 mg/l
10.80 mg/l
8 - 12 mg/l
995.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 336.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 1.08 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 3.22 µg/l | 12 µg/l |
336.00 µg/l
200 µg/l
1.08 µg/l
5 µg/l
3.22 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 118.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 1.86 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 222.00 µg/l | 30 - 90 µg/l |
0.00 µg/l
0 - 3 µg/l
118.00 µg/l
0 - 5 µg/l
1.86 µg/l
0 - 3 µg/l
222.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 81.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
81.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 34.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
34.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 112.00 µg/l | 0 - 200 µg/l |
112.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 428.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 1.310 mg/l | 0.018 - 0.07 mg/l |
428.00 µg/l
6 - 23 µg/l
1.310 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Due to excessively high P/PO4 readings it has not been possible to accuratly test for Iodine
Lower P/PO4 value by using AL99 or ROWAphos phospate remover, then retest.
The analysis has found that the Calcium levels are slightly low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Your Iron levels are too high.
Check for possible contamination source. To help you in finding the source of error, we have listed them the most common sources of iron (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Iron based Phosphate remover (too much flow in reactor)
4. Low pH in the aquarium
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Your Lithium levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common lithium sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts / contaminated magnesium salts
3. Artificial Rock/ Reef ceramics
4. Food
Your Bromine levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most frequent bromine sources (sorted in descending order of frequency):
1. Contaminated salts such as calcium chloride
2. Contaminated trace elements
3. Contaminated salt mixtures
If you have problems in the aquarium you can change 2x 10-15% of the aquarium water, spread over 2-4 weeks.
Monitor with future ICP-OES tests.
Your Calcium levels are slightly low.
Check for accuracy of home Ca test kit if used.
Please dose as recommended in the DOSE tab.
Check salinity measuring equipment for accuracy and lower salinity and monitor.
Check salinity measuring equipment for accuracy and monitor.
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 20.6116g. On the last day please use 10.38g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 35.21ml for 1 day.
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 22.7ml. On the last day please use 17.19ml.
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.55ml for 1 day.
We recommend a daily maintenance dose of 0.04ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.64ml for 1 day.
We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 9.08ml. On the last day please use 8.73ml.
Select your country and buy the products here