Single View for Evaluation ICP-OES

Unwanted heavy metals (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
HgQuicksilver 0 µg/l 0,1 µg/l -0.10
SeSelenium 0 µg/l 0,1 µg/l -0.10
CdCadmium 0 µg/l 0,1 µg/l -0.10
SnTin 0 µg/l 0,1 µg/l -0.10
SbAntimony 0 µg/l 0,1 µg/l -0.10
AsArsenic 0 µg/l 0,1 µg/l -0.10
AlAluminium 93 µg/l 2 µg/l 91.00
PbLead 0 µg/l 0,1 µg/l -0.10
TiTitanium 0 µg/l 0,1 µg/l -0.10
CuCopper 2.98 µg/l 0.1 µg/l 2.88
LaLanthanum 0 µg/l 0.1 µg/l -0.10
ScScandium 0 µg/l 0.1 µg/l -0.10
WTungsten 0 µg/l 0.1 µg/l -0.10

Hg

Analyse

0 µg/l

Sollwert

0,1 µg/l

Se

Analyse

0 µg/l

Sollwert

0,1 µg/l

Cd

Analyse

0 µg/l

Sollwert

0,1 µg/l

Sn

Analyse

0 µg/l

Sollwert

0,1 µg/l

Sb

Analyse

0 µg/l

Sollwert

0,1 µg/l

As

Analyse

0 µg/l

Sollwert

0,1 µg/l

Al

Analyse

93 µg/l

Sollwert

2 µg/l

Pb

Analyse

0 µg/l

Sollwert

0,1 µg/l

Ti

Analyse

0 µg/l

Sollwert

0,1 µg/l

Cu

Analyse

2.98 µg/l

Sollwert

0.1 µg/l

La

Analyse

0 µg/l

Sollwert

0.1 µg/l

Sc

Analyse

0 µg/l

Sollwert

0.1 µg/l

W

Analyse

0 µg/l

Sollwert

0.1 µg/l

Macro-Elements (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
NaSodium 10714 mg/l 10700 mg/l 14.00
CaCalcium 469 mg/l 440 mg/l 29.00
MgMagnesium 1372 mg/l 1370 mg/l 2.00
KPotassium 425 mg/l 400 mg/l 25.00
BrBromide 72 mg/l 62 mg/l 10.00
BBoron 4.42 mg/l 4,5 mg/l -0.08
SrStrontium 5.123 mg/l 8 mg/l -2.88
SSulphur 892 mg/l 900 mg/l -8.00

Na

Analyse

10714 mg/l

Sollwert

10700 mg/l

Ca

Analyse

469 mg/l

Sollwert

440 mg/l

Mg

Analyse

1372 mg/l

Sollwert

1370 mg/l

K

Analyse

425 mg/l

Sollwert

400 mg/l

Br

Analyse

72 mg/l

Sollwert

62 mg/l

B

Analyse

4.42 mg/l

Sollwert

4,5 mg/l

Dosage

Total of 12.87 ml for 1 day.

Sr

Analyse

5.123 mg/l

Sollwert

8 mg/l

Dosage

Total: 2 days.
First 1 days: 128.8ml.
Last day: 102.93ml.

S

Analyse

892 mg/l

Sollwert

900 mg/l

Dosage

Total of 132.04 ml for 1 day.

Li-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
LiLithium 175 µg/l 200 µg/l -25.00
NiNickel 2.421 µg/l 5 µg/l -2.58
MoMolybdenum 5.618 µg/l 12 µg/l -6.38

Li

Analyse

175 µg/l

Sollwert

200 µg/l

Dosage

Total of 32.19 ml for 1 day.

Ni

Analyse

2.421 µg/l

Sollwert

5 µg/l

Dosage

Total: 2 days.
First 1 days: 12.88ml.
Last day: 3.73ml.

Mo

Analyse

5.618 µg/l

Sollwert

12 µg/l

Dosage

Total: 2 days.
First 1 days: 32.2ml.
Last day: 8.87ml.

I-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
VVanadium 0 µg/l 1,2 µg/l -1.20
ZnZinc 1.497 µg/l 4 µg/l -2.50
MnManganese 0 µg/l 2 µg/l -2.00
IIodine 47 µg/l 60 µg/l -13.00

V

Analyse

0 µg/l

Sollwert

1,2 µg/l

Dosage

Total of 0.77 ml for 1 day.

Zn

Analyse

1.497 µg/l

Sollwert

4 µg/l

Dosage

Total of 1.61 ml for 1 day.

Mn

Analyse

0 µg/l

Sollwert

2 µg/l

Dosage

Total: 2 days.
First 1 days: 6.44ml.
Last day: 6.43ml.

I

Analyse

47 µg/l

Sollwert

60 µg/l

Dosage

Total of 1.67 ml for 1 day.

Fe-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
CrChromium 0 µg/l 0,1 µg/l -0.10
CoCobalt 0 µg/l 0,1 µg/l -0.10
FeIron 0 µg/l 0,1 µg/l -0.10

Cr

Analyse

0 µg/l

Sollwert

0,1 µg/l

Co

Analyse

0 µg/l

Sollwert

0,1 µg/l

Fe

Analyse

0 µg/l

Sollwert

0,1 µg/l

Ba-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
BaBarium 141 µg/l 10 µg/l 131.00
BeBeryllium 0 µg/l 0,1 µg/l -0.10

Ba

Analyse

141 µg/l

Sollwert

10 µg/l

Be

Analyse

0 µg/l

Sollwert

0,1 µg/l

Si-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
SiSilicon 138 µg/l 100 µg/l 38.00

Si

Analyse

138 µg/l

Sollwert

100 µg/l

Nutrient-Group (170 Gallons)

Element Analysis Setpoint Deviation Warning lamp
PPhosphorus 20 µg/l 6 µg/l 14.00
PO4Phosphate 0.0612 mg/l 0.01836 mg/l 0.043

P

Analyse

20 µg/l

Sollwert

6 µg/l

PO4

Analyse

0.0612 mg/l

Sollwert

0.01836 mg/l

Filter
Detection Action

Low levels of Aluminium have been found in your system.

This is normal if you are using an aluminium based PO4 media. However try to find the contamination. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):

1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water

Use ROWAphos phosphate media to remove the aluminium.

Low levels of Copper have been found in your system.

Although not as dangerous at very low levels it is important that you check your system for any possible contaminations.

To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):

1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water

To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks

Your Barium levels are too high.

Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):

1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood

Use AL99 PO4 remover to remove Barium

Your Phosphorus / Phosphate levels are slightly elevated.

Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):

1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients

Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods

Low levels of Aluminium have been found in your system.

This is normal if you are using an aluminium based PO4 media. However try to find the contamination. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):

1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water

Use ROWAphos phosphate media to remove the aluminium.

Filter
Detection Action

Important for your aquarium

B: We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.

B: We recommend the corrective dosage of 12.87 ml for 1 day.

Sr: We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.

Sr: We recommend the corrective dosage be carried out over 2 days. For the first 1 days the daily dosage should be 128.8ml. On the last day please use 102.93ml.

I: We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.

I: We recommend the corrective dosage of 1.67 ml for 1 day.

I: We recommend a daily maintenance dose of 0.17ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).

Not important but beneficial for your aquarium

S: We have detected a lack of sulphur.
A sulfate dosage may have the following advantages for your aquarium:
- Helps the coral to build it`s skeleton
- Can promote LPS / SPS coloring and growth
To restore the natural value, please refer to our recommended dosage.

S: We recommend the corrective dosage of 132.04 ml for 1 day.

Li: We have detected a lack of lithium.
A lithium dosage may have the following advantages for your aquarium:
- Improving the overall health of the reef aquarium
- Pests such as Algae and bacterial plaques can be reduced by aiding the natural aquarium chemistry.
- Improves the general condition of LPS corals, they may have a higher feed intake
To restore the natural value, please refer to our recommended dosage.

Li: We recommend the corrective dosage of 32.19 ml for 1 day.

Fine-tuning Level 1 ( Basic )

Mo: We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.

Mo: We recommend the corrective dosage be carried out over 2 days. For the first 1 days the daily dosage should be 32.2ml. On the last day please use 8.87ml.

V: We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.

V: We recommend the corrective dosage of 0.77 ml for 1 day.

V: We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).

Mn: We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.

Mn: We recommend the corrective dosage be carried out over 2 days. For the first 1 days the daily dosage should be 6.44ml. On the last day please use 6.43ml.

Mn: We recommend a daily maintenance dose of 1.07ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).

Fine-tuning Level 1 ( Advanced )

Ni: Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.

Ni: We recommend the corrective dosage be carried out over 2 days. For the first 1 days the daily dosage should be 12.88ml. On the last day please use 3.73ml.

Zn: We have detected a lack of zinc.
A zinc dosage may have the following advantages for your aquarium:
- Can promote enzymatic processes in reef aquariums
- Can promote color and health of LPS and SPS corals
To restore the natural value, please refer to our recommended dosage.
To keep this value, please refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0

Zn: We recommend the corrective dosage of 1.61 ml for 1 day.

Zn: We recommend a daily maintenance dose of 0.16ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).

Download as PDF