Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Al Aluminium | Aluminium | 129.00 µg/l | 0 - 60 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 13.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Al | Aluminium
Analysis
129.00 µg/l
Setpoint
0 - 60 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
13.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10229.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 444.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1294.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 392.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 59.00 mg/l | 64 mg/l | |
| B Boron | Boron | 4.10 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 7.00 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 895.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10229.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
444.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1294.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
392.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
59.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
4.10 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
7.00 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
895.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 180.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 311.00 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 0.00 µg/l | 12 µg/l |
Li | Lithium
Analysis
180.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
311.00 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
0.00 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 972.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 0.16 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 1.48 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 58.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
972.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
0.16 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
1.48 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
58.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 79.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
79.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 52.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
52.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 39.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.119 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
39.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.119 mg/l
Setpoint
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Mg
The analysis has found that the Magnesium levels are slightly low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
Cu
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
P
Your Phosphorus / phosphate levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods (flakes or pellets)
Ba
Your Barium levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Monitor with future ICP-OES tests.
Use TRITON AL99 PO4 remover to remove Barium
V
Your Vanadium levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of vanadium (sorted in descending order of frequency):
1. Trace element overdose
2. Reef ceramics
3. Contaminated salts
Ni
Your Nickel levels are dangerously high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common nickel sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
Mg
Your Magnesium levels are slightly low.
Please check your magnesium test kit for accuracy.
Please dose as recommended in the DOSE tab.
Cu
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Al
High levels of Aluminium have been found in your system.
As high levels of Aluminium can be dangerous to your aquarium you should try to find the contamination. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):
1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water
Use ROWAphos or Phosban phosphate remover media to remove the aluminium.
Very important for your aquarium
Mg
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 4 days. For the first 3 days the daily dosage should be 151.5g. On the last day please use 121.26g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
K
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage of 11.54g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
B
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 75.00ml for 1 day.
Sr
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 9.04ml for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.30ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
I
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 0.30ml for 1 day.
We recommend a daily maintenance dose of 0.03ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Basic )
Mo
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 37.5ml. On the last day please use 15.00ml.
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 3.90ml for 1 day.
We recommend a daily maintenance dose of 0.33ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Zn
We have detected a lack of zinc.
A zinc dosage may have the following advantages for your aquarium:
- Can promote enzymatic processes in reef aquariums
- Can promote color and health of LPS and SPS corals
To restore the natural value, please refer to our recommended dosage.
To keep this value, please refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0
We recommend the corrective dosage of 2.88ml for 1 day.
We recommend a daily maintenance dose of 0.29ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Select your country and buy the products here
-
1x Triton Reagents Magnesium 1000g
0
-
1x Triton Reagents Potassium 1000g
0
-
1x Triton Reagents Bromine 100ml - 10x concentrate
0
-
1x Triton Reagents Boron 1000ml
0
-
1x Triton Reagents Strontium 100ml - 10x concentrate
0
-
1x Triton Reagents Sulphate 1000g
0
-
1x Triton Reagents Lithium 100ml
0
-
1x Triton Reagents Molybdenum 100ml
0
-
1x Triton Reagents Zinc 100ml
0
-
1x Triton Reagents Manganese 100ml
0
-
1x Triton Reagents Iodine 100ml
0