Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Al Aluminium | Aluminium | 11.00 µg/l | 0 - 60 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 0.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 4.14 µg/l | 0 µg/l |
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Al | Aluminium
Analysis
11.00 µg/l
Setpoint
0 - 60 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
0.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
4.14 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10535.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 445.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1515.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 356.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 66.00 mg/l | 64 mg/l | |
| B Boron | Boron | 4.82 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 8.50 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 888.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10535.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
445.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1515.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
356.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
66.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
4.82 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
8.50 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
888.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 202.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 2.20 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 15.00 µg/l | 12 µg/l |
Li | Lithium
Analysis
202.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
2.20 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
15.00 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 1.68 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 9.67 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 83.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
1.68 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
9.67 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
83.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 24.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
24.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 335.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
335.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 8.33 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.025 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
8.33 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.025 mg/l
Setpoint
0.018 - 0.07 mg/l
Si
Your Silicon levels are slightly elevated.
Check for possible contamination source. To help you in finding the source of error, we have listed the most frequent sources of contamination for silicon (sorted in descending order of frequency):
1. RO/DI Supply
2. Iron based phosphate remover (not RowaPhos or PhosBan)
3. SIPORAX Type media
4. Ceramics
Renew PO4 media, use AL99 or RowaPhos/PhosBan
Zn
Your Zinc levels are slightly elevated.
Check for possible contamination source. Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
K
Your Potassium levels are slightly low.
Please dose as recommended in the DOSE tab.
Mg
Your Magnesium levels are slightly elevated.
Please check your magnesium test kit for accuracy.
W
Low levels of Tungsten have been found in your system.
Although not as dangerous at very low levels it is important that you check your system for any possible contaminations. To assist you in finding the source of error, we have listed them the most common sources of tungsten (sorted in descending order of frequency):
1. Metals near or in the aquarium (for example, pumps axles Cheap pumps)
2. Contaminated salts
3. Trace element overdose / contamination
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Very important for your aquarium
K
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 100.56g. On the last day please use 82.51g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
P
The analysis has found a low phosphorus / phosphate level in the aquarium.
In case of problems we recommend to remove/reduce the phosphate absorber from the system and to increase feeding.
For problems with Cyanobacteria, the product that best suits your system is:
TRITON Organic Supplements P Beta
For a fish tank without algae/Cyanobacteria problems the product that is best suited is:
TRITON Organic Supplements P Alpha
Please contact us for further support on hello@triton.de
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 3.352ml. On the last day please use 0.45ml.
Fine-tuning Level 1 ( Basic )
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 33.52ml.
We recommend a daily maintenance dose of 5.59ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 67.04ml. On the last day please use 26.82ml.
Select your country and buy the products here
-
1x Triton Reagents Potassium 1000g
0
-
1x Triton Reagents Sulphate 1000g
0
-
1x Triton Reagents Nickel 100ml
0
-
2x Triton Reagents Manganese 100ml
0
-
1x TRITON Organics Phosphorus Supplement 100ml
0