Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Al Aluminium | Aluminium | 4.45 µg/l | 0 - 60 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 45.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Al | Aluminium
Analysis
4.45 µg/l
Setpoint
0 - 60 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
45.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Na Sodium | Sodium | 10568.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 299.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1346.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 385.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 52.00 mg/l | 64 mg/l | |
| B Boron | Boron | 7.00 mg/l | 4.5 mg/l | |
| Sr Strontium | Strontium | 2.03 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 884.00 mg/l | 900 mg/l |
Na | Sodium
Analysis
10568.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
299.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1346.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
385.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
52.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
7.00 mg/l
Setpoint
4.5 mg/l
Sr | Strontium
Analysis
2.03 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
884.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 131.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 4.13 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 5.56 µg/l | 12 µg/l |
Li | Lithium
Analysis
131.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
4.13 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
5.56 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 34.00 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 309.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
34.00 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
309.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 26.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
26.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 127.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
127.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 20.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.061 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
20.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.061 mg/l
Setpoint
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Sr
The analysis has found that the Strontium level in the aquarium is low.
For your chosen Habitat we would recommend to also follow the daily dosage advice of Strontium as this should benefit the animals in your aquarium.
3 weeks prior to fragging we would recommend that you double the daily dosage.
Ca
The analysis has found that the Calcium levels are low.
For the animals kept in your your chosen Habitat this is not a significant issue.
We still advise to maintain the level within the recommended range by following the dosage advice as it helps improve the general look of your aquarium.
Cu
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
B
Your Boron levels are too high.
Please try to find the reason for the contamination, these are the most common case:
1. Trace mineral overdose or contamination
I
Your Iodine levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of iodine (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Contaminated salts
Zn
Your Zinc levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of zinc (sorted in descending order of frequency):
1. Contaminated trace elements
2. Hand Cream applied before working in the aquarium
3. Contaminated salts
Li
Your Lithium levels are slightly low.
Please dose as recommended in the DOSE tab.
Sr
Your Strontium levels are too low.
Please dose as recommended in the DOSE tab.
Br
Your Bromine levels are slightly low.
WARNING! Dosage only to be carried out by advanced reef keepers.
Due to the possible hazardous nature of dosing Bromine the dosage amounts include a safety factor to ensure that the risk of overdose is reduced. This may result in further dosing being required with subsequent ICP testing.
Please follow the directions on the Dose tab.
Ca
Your Calcium levels are too low.
Check for accuracy of home Ca test kit if used.
Please dose as recommended in the DOSE tab.
Cu
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Very important for your aquarium
Ca
We have detected a lack of calcium.
A calcium dosage may have the following advantages for your aquarium:
- Calcium is essential for calcification
- Important for the development of healthy coral skeleton
- A lack of calcium can have very bad effects on the aquarium, please act quickly to restore.
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 12 days. For the first 11 days the daily dosage should be 9.988g. On the last day please use 3.76g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Mg
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 44.44g. On the last day please use 8.89g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
K
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage of 6.35g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
Sr
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 4 days. For the first 3 days the daily dosage should be 4.4ml. On the last day please use 2.62ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.53ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Basic )
Mo
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 11ml. On the last day please use 3.17ml.
V
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.26ml for 1 day.
We recommend a daily maintenance dose of 0.02ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Mn
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 2.2ml.
We recommend a daily maintenance dose of 0.37ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage of 1.91ml for 1 day.
Select your country and buy the products here
-
1x Triton Reagents Calcium 1000g
0
-
1x Triton Reagents Magnesium 1000g
0
-
1x Triton Reagents Potassium 1000g
0
-
1x Triton Reagents Bromine 100ml - 10x concentrate
0
-
1x Triton Reagents Strontium 100ml - 10x concentrate
0
-
1x Triton Reagents Sulphate 1000g
0
-
1x Triton Reagents Lithium 100ml
0
-
1x Triton Reagents Nickel 100ml
0
-
1x Triton Reagents Molybdenum 100ml
0
-
1x Triton Reagents Vanadium 100ml
0
-
1x Triton Reagents Manganese 100ml
0