Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Choose your Habitat here
Choose your Problem here
Unwanted heavy metals | Analysis | Setpoint | ||
---|---|---|---|---|
Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
Sn Tin | Tin | 30.00 µg/l | 0 µg/l | |
Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
Al Aluminium | Aluminium | 71.00 µg/l | 0 - 60 µg/l | |
Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
Cu Copper | Copper | 6.97 µg/l | 0 µg/l | |
La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
30.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
71.00 µg/l
0 - 60 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
6.97 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Macro-Elements | Analysis | Setpoint | ||
---|---|---|---|---|
Na Sodium | Sodium | 10127.00 mg/l | 10000 - 11300 mg/l | |
Ca Calcium | Calcium | 468.00 mg/l | 415 - 520 mg/l | |
Mg Magnesium | Magnesium | 1346.00 mg/l | 1320 - 1500 mg/l | |
K Potassium | Potassium | 354.00 mg/l | 380 - 480 mg/l | |
Br Bromide | Bromide | 50.00 mg/l | 64 mg/l | |
B Boron | Boron | 7.79 mg/l | 4.5 mg/l | |
Sr Strontium | Strontium | 6.59 mg/l | 8 - 12 mg/l | |
S Sulphur | Sulphur | 664.00 mg/l | 900 mg/l |
10127.00 mg/l
10000 - 11300 mg/l
468.00 mg/l
415 - 520 mg/l
1346.00 mg/l
1320 - 1500 mg/l
354.00 mg/l
380 - 480 mg/l
50.00 mg/l
64 mg/l
7.79 mg/l
4.5 mg/l
6.59 mg/l
8 - 12 mg/l
664.00 mg/l
900 mg/l
Li-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Li Lithium | Lithium | 186.00 µg/l | 200 µg/l | |
Ni Nickel | Nickel | 103.00 µg/l | 5 µg/l | |
Mo Molybdenum | Molybdenum | 64.00 µg/l | 12 µg/l |
186.00 µg/l
200 µg/l
103.00 µg/l
5 µg/l
64.00 µg/l
12 µg/l
I-Group | Analysis | Setpoint | ||
---|---|---|---|---|
V Vanadium | Vanadium | 1304.00 µg/l | 0 - 3 µg/l | |
Zn Zinc | Zinc | 0.00 µg/l | 0 - 5 µg/l | |
Mn Manganese | Manganese | 0.00 µg/l | 0 - 3 µg/l | |
I Iodine | Iodine | 169.00 µg/l | 30 - 90 µg/l |
1304.00 µg/l
0 - 3 µg/l
0.00 µg/l
0 - 5 µg/l
0.00 µg/l
0 - 3 µg/l
169.00 µg/l
30 - 90 µg/l
Fe-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
Fe Iron | Iron | 0.00 µg/l | 0 µg/l |
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
0.00 µg/l
0 µg/l
Ba-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Ba Barium | Barium | 62.00 µg/l | 0 - 10 µg/l | |
Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
62.00 µg/l
0 - 10 µg/l
0.00 µg/l
0 µg/l
Si-Group | Analysis | Setpoint | ||
---|---|---|---|---|
Si Silicon | Silicon | 0.00 µg/l | 0 - 200 µg/l |
0.00 µg/l
0 - 200 µg/l
Nutrient-Group | Analysis | Setpoint | ||
---|---|---|---|---|
P Phosphorus | Phosphorus | 184.00 µg/l | 6 - 23 µg/l | |
PO4 Phosphate | Phosphate | 0.563 mg/l | 0.018 - 0.07 mg/l |
184.00 µg/l
6 - 23 µg/l
0.563 mg/l
0.018 - 0.07 mg/l
We detected elements in your water that can be harmful for your tank.
More information about each element is listed below.
To remedy this we recommend carrying out 6 x 15% water changes with Tropic Marin Pro salt or Red Sea Salt (blue bucket), spread over 6 weeks
Due to excessively high P/PO4 readings it has not been possible to accuratly test for Iodine
Lower P/PO4 value by using AL99 or ROWAphos phospate remover, then retest.
The analysis has found an elevated level of Copper in the aquarium.
This could be the result of fish medication.
For your chosen Habitat this is not of concern unless it reaches levels higher than 100ppb
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
Low levels of Aluminium have been found in your system.
Although not as dangerous at very low levels it is important that you check your system for any possible contaminations. To assist you in finding the source of error, we have listed them the most common sources of aluminium (sorted in descending order of frequency):
1. Aluminium based Phosphate remover
2. Zeolite
3. Metals in water
Use ROWAphos or Phosban phosphate remover media to remove the aluminium.
Your Boron levels are too high.
Please try to find the reason for the contamination, these are the most common case:
1. Trace mineral overdose or contamination
Your Barium levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Monitor with future ICP-OES tests.
Use TRITON AL99 PO4 remover to remove Barium
Your Vanadium levels are too high.
Check for possible contamination source. To assist you in finding the source of error, we have listed the most common sources of vanadium (sorted in descending order of frequency):
1. Trace element overdose
2. Reef ceramics
3. Contaminated salts
Your Molybdenum levels are too high. This can lead to severe bacterial growth (Cyano, etc.).
Check for possible contamination source. To assist you in finding the source of error, we have listed them the most common sources of molybdenum (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Food
3. Contaminated salts
Your Nickel levels are dangerously high.
Check for possible contamination source. To help you in your search for the source of error, we have listed them the most common nickel sources (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
Your Sulphur levels are slightly low.
Monitor with future ICP-OES tests.
Your Bromine levels are slightly low.
WARNING! Dosage only to be carried out by advanced reef keepers.
Due to the possible hazardous nature of dosing Bromine the dosage amounts include a safety factor to ensure that the risk of overdose is reduced. This may result in further dosing being required with subsequent ICP testing.
Please follow the directions on the Dose tab.
Your Potassium levels are slightly low.
Please dose as recommended in the DOSE tab.
We have detected copper in your aquarium, this can be a dangerous metal for reef aquariums. Please try to find the reason for the contamination.
To help you in your search for the source of error, we have listed them the most common sources of copper (sorted in descending order of frequency):
1. Contaminated trace element solutions
2. Bio-pellets
3. Contaminated salts
4. Contaminated food
5. Corroding metals or magnets near the water
Countermeasure: TRITON DETOX should be applied before the water changes.
Application DETOX: Take activated carbon and Phosphate media out of the system, add 3ml Detox / 100l of aquarium water. After 3 days, put on fresh activated carbon (Phosphate media can now also be introduced again), activated carbon should be changed after 7 days.
High levels of Tin have been found in your system.
As Tin can be very dangerous to you aquarium you should first try to find the contamination source. To help you in finding the source of error, we have listed the most common sources of tin (sorted in descending order of frequency):
1. Contaminated trace elements
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Contaminated salts
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 10.23g. On the last day please use 9.69g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 68.882g. On the last day please use 13.73g.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 5.79ml for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.19ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of manganese.
A Manganese dose may have the following advantages for your aquarium:
- Can be useful for keeping LPS corals, for example, Goniopora respond very positively to Manganese dosage
- Can promote better polyp extension
To restore the natural value, please refer to our recommended dosage.
To keep this value, refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1 Test: dose maintenance dose xml
2 Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) xml dosing.
3 Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage be carried out over 2 days. For the first 2 days the daily dosage should be 3.41ml.
We recommend a daily maintenance dose of 0.57ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
We have detected a lack of zinc.
A zinc dosage may have the following advantages for your aquarium:
- Can promote enzymatic processes in reef aquariums
- Can promote color and health of LPS and SPS corals
To restore the natural value, please refer to our recommended dosage.
To keep this value, please refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0
We recommend the corrective dosage of 1.36ml for 1 day.
We recommend a daily maintenance dose of 0.14ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Select your country and buy the products here